20:"$Sreact.view_transition" 21:I[9754,["/_next/static/chunks/2qcf_o2xotudn.js","/_next/static/chunks/1gyqeidjm5eoa.js","/_next/static/chunks/0_fjnxc4tt_l_.js","/_next/static/chunks/1ymt1shyhmu-4.js","/_next/static/chunks/3kv2zf0i7s2wc.js","/_next/static/chunks/1ucasf31l8j2v.js","/_next/static/chunks/0yj6_8vip2oqy.js","/_next/static/chunks/2l5xdnifczg1b.js","/_next/static/chunks/192kgs9v_t14j.js","/_next/static/chunks/0z6pw0v5c_lx5.js","/_next/static/chunks/08r60e6icmtkc.js","/_next/static/chunks/3trx6c0i7_x-3.js","/_next/static/chunks/40sro5bzp9bi_.js","/_next/static/chunks/1wgf3tk38y6cf.js"],"ProjectDetail"] 22:T3f1c, claude-code-settings · 接线台

Session Switchboard · 接线台

一条信号线，
接往任意能力

claude-code-settings 把技能、子代理与配置模板装进 Claude Code，再让你在模型提供商之间随时换接。能力像可路由的信号：从技能的中央主线扇出成并行轨道，汇入可换接头的插座。装什么、往哪接、多模型切换，一目了然。

PYTHONMITfeiskyer / claude-code-settings

0 ······ 1 ······ 2

SINGLE → PARALLEL RAILS → PROVIDER SOCKETS | 接线排为派生示意图，非产品界面截图

RAIL / 02

三条并行能力轨道

CH-01

skills技能

深度调研、图片生成、GitHub 自动化等精选技能，装进 Claude Code 即可调用。

CH-02

sub-agents子代理

PR 审查、Issue 修复、UI 工程等专业子代理，把复杂任务拆给并行角色。

CH-03

config templates配置模板

模型提供商各自的连接模板，装好后在条接线命令里即可切换。

TALLY / 03

面板上刻实的数

接线台上，装好多少就显示多少

计数来自仓库描述与 README，都是当前公开快照里查验过的数据，不注水。

精选技能
SKILLS

专业子代理
SUB-AGENTS

配置模板
CONFIG TEMPLATES

JACK / 04

可换接头的模型插座

同一套配好的能力，把接头一换，就接到另一家模型上——这就是多模型切换的实际路径。

GitHub Copilotprovider socket

LiteLLMprovider socket

DeepSeekprovider socket

Qwenprovider socket

Vertex AIprovider socket

Azureprovider socket

WIRE / 05

装线的步骤

STEP 01 · 装上全部技能

npx -y skills add --all feiskyer/claude-code-settings

一条命令把整套接线接上；也可手动挑选想要的技能再装。

STEP 02 · 手动接入配置

git clone 本仓库 → 覆盖 ~/.claude

手动安装会写入 ~/.claude 目录，改动前建议先备份原有配置。

Switchboard / ENGAGED

合上盖板

接线台已经铺好：三条轨道、一排插座、两条装线命令。剩下的选择权在你——想接哪家，就换哪个接头。

查看 GitHub 仓库↗

来源 · github.com/feiskyer/claude-code-settings feisky.xyz/claude-code-settings

23:T3d00, claude-code-settings · switchboard

Session Switchboard

One signal line,
patched into any capability

claude-code-settings wires skills, sub-agents, and config templates into Claude Code — then lets you re-patch between model providers. Capabilities behave like routable signals: a central line from the skills fans out into parallel rails, converging on sockets with swappable connectors. What you add, where it lands, and how you switch models are all visible at a glance.

PYTHONMITfeiskyer / claude-code-settings

0 ······ 1 ······ 2

SINGLE → PARALLEL RAILS → PROVIDER SOCKETS | patch-bay is a derived diagram, not a product screenshot

RAIL / 02

Three parallel capability rails

CH-01

skillscapability rail

Curated skills for deep research, image generation, and GitHub automation — wired into Claude Code and ready to call on.

CH-02

sub-agentscapability rail

Specialized sub-agents for PR review, issue fixing, and UI engineering — handing heavy jobs to parallel roles.

CH-03

config templatescapability rail

Per-provider connection templates, so switching models comes down to re-patching one routed line.

TALLY / 03

Counts etched into the panel

What the board says is what's installed

These figures come from the repository description and README — checked against the current public snapshot, not inflated.

curated skills
SKILLS

specialized sub-agents
SUB-AGENTS

config templates
CONFIG TEMPLATES

JACK / 04

Swappable model sockets

With the same wired capabilities, swap the connector and you land on another model — that's the practical path to multi-model switching.

GitHub Copilotprovider socket

LiteLLMprovider socket

DeepSeekprovider socket

Qwenprovider socket

Vertex AIprovider socket

Azureprovider socket

WIRE / 05

The steps to pull the cable

STEP 01 · Patch in every skill

npx -y skills add --all feiskyer/claude-code-settings

One command routes the whole set in; you can also hand-pick skills when adding manually.

STEP 02 · Wire configs by hand

git clone this repo → overlay ~/.claude

Manual install writes into the ~/.claude directory, so back up your existing config first.

Switchboard / Engaged

Close the panel

The board is set: three rails, a row of sockets, and two routing commands. The choice stays with you — pick a provider, swap the connector, and go.

View on GitHub↗

Sources · github.com/feiskyer/claude-code-settings feisky.xyz/claude-code-settings

a:[["$","$20",null,{"enter":{"secondary-forward":"secondary-forward","secondary-back":"secondary-back-enter","default":"none"},"exit":{"secondary-forward":"secondary-forward","secondary-back":"secondary-back-exit","default":"none"},"update":{"secondary-forward":"secondary-forward","secondary-back":"secondary-back-update","default":"none"},"default":"none","children":["$","$L21","cmsnf3se200crcz47m1hjpig2:zh-CN:beautified",{"project":{"id":"cmsnf3se200crcz47m1hjpig2","slug":"feiskyer-claude-code-settings","name":"claude-code-settings","description":"精选技能、子代理与配置模板，开箱即用。","authorName":"feiskyer","authorVerification":{"verified":false,"verifiedAt":null},"category":"development_tools","subcategory":"data_ai_tools","experienceUrl":"https://feisky.xyz/claude-code-settings/","qualityScore":96,"featured":false,"officialSite":null,"views":{"original":{"available":true},"official":{"available":false,"reason":"disabled_by_policy"},"beautified":{"available":true,"reason":null},"defaultView":"beautified"},"beautifiedView":{"revisionId":"cmt2zh03000l86271dzxhorlo","kind":"artifact","artifact":{"schemaVersion":"localized-static-html-v4","kind":"static_html","locales":["zh-CN","en"],"defaultLocale":"zh-CN","documents":{"zh-CN":"$22","en":"$23"},"designDirections":{"schemaVersion":"dodot-design-directions-v1","directions":[{"id":"session-switchboard","name":"Session Switchboard","projectMetaphor":"能力像可路由的信号：一条来自技能的中央线路扇出成并行轨道，再汇入可换接头的模型提供商插座——装什么、往哪接、多模型切换，一目了然。","signatureVisual":"一条中央 agent 主线从左端出发，扇出为三条平行能力轨道（skills / sub-agents / config templates），末端重新汇入一排可换接头（Copilot、LiteLLM、DeepSeek…）的 provider 插座。","heroGeometry":"水平接线排：单线进入后分成多层垛叠短线（patch-bay），每层标一个能力类别，右端以插头符号对准一排纵向插孔。","sectionSequence":["切换开关序言（一条线如何接往不同能力）","能力轨道：skills / sub-agents / templates 三条并行轨","证据计数：12 技能 · 6 子代理 · 10 模板","provider 插座：Copilot、LiteLLM、DeepSeek 等可换接头","装线命令：npx skills add 的接线步骤","合上盖板收尾"],"surfaceModel":"磨砂暗面板丝网印刷质感：硬质嵌入式凹槽刻线、冷光铜色插头、细接线细影；面板上刻印比例尺与小标注。","palette":"底墨蓝黑，板面深石板灰，轨道线琥珀铜，插孔高光冷青，标注铁灰白。","typography":"编辑型超大门楣 + 窄行高接线标注；等宽字体用于插孔号与命令，衬线只留给强调说法。","desktopComposition":"单屏单一主焦点：左侧能力轨道线性阵列，右端固定一排竖向插孔，事实说明居于轨道上方，命令区悬浮在插座之下。","mobileTransformation":"390px：横向接线排回正为纵向竖线轨道，每条轨线上能力与插孔上下叠放成竖塔，文字与接线标注保留至少 20px 安全区。","mediaStrategy":"无本地合格素材，删除媒体区；标志视觉完全由接线轨与插孔的关系图派生，不伪造截图。","forbiddenPatterns":["三卡指标墙","假终端/假 IDE 壳","发光网格或粒子替代视觉"],"compositionFingerprint":"single → parallel rails → provider sockets"},{"id":"tool-rack-foldout","name":"Tool Rack Fold-Out","projectMetaphor":"一座策展过的专用工具架：每个技能是一枚有出处的专用器械，需要时抽出展开，背面贴着可用的模型提供商标签。","signatureVisual":"一排铰接的模块板（research / image / review / issue-fix / UI）沿折叠线倾斜扬起，翻起后露出背面叠放的可换 provider 标签。","heroGeometry":"等轴折叠瀑布：一条铰链线，五块打磨过的器械板依次翘起，边缘印有工装刻字型号。","sectionSequence":["工具架序言（把需要的器械从架上抽出）","单件器械板：每板一技能 + 用途","证据计数：12 器械 · 6 专用子代理 · 10 模板","板后 provider 标签：这些器械可接在哪些模型上","取用/展开步骤：npx skills add 的上架方式","收起归位收尾"],"surfaceModel":"原木工坊台面 + 黄铜铰链：磨砂机械板、锋利的内切标签槽、哑光金属；器械投影短而硬。","palette":"台面暖棕木，器械板冷灰钢，铰链黄铜，标签蜜色底、深墨字，强调哑光朱红。","typography":"高对比几何标题配技术等宽型号，器械名粗壮、用途注释细窄；机械铭刻风格。","desktopComposition":"单屏以一排折叠板为主焦点，铰链线横贯首屏，板与板错落扬起；证据计数以铭刻行嵌入木板边缘，provider 标签藏在板后可用悬停翻开。","mobileTransformation":"390px：铰链折叠改为纵向手风琴拉起，每板整块上提露出下方标签，木台质感压缩为单条基线。","mediaStrategy":"无本地合格素材，删除媒体区；器械板为纯派生视觉，不伪造产品界面截图。","forbiddenPatterns":["假设置面板复刻","通用三卡 SaaS","装饰性渐变占位"],"compositionFingerprint":"hinged fold-line of tilted plates → underside provider tabs"},{"id":"capability-halo","name":"Capability Halo","projectMetaphor":"同一个中心 agent 配一圈可替换的手：技能是环绕的光晕节点，模型提供商是外环上可旋转对准的插座。","signatureVisual":"同心圆图：中心是光标/agent，内环排列技能节点，由可旋转辐条连到当前激活技能，外环等距分布 provider 插座。","heroGeometry":"同心环 + 旋转辐条：中心点、技能环、provider 外环，一根辐条把中心、当前技能与外环插座三点串成一条弧。","sectionSequence":["光环序言（一个中心，多个可换的手）","技能环：skill 节点依次列点","证据计数：12 节点 · 6 子代理 · 10 模板","provider 外环：可旋转对准的模型插座","聚焦/取用：radial 地取 npx skills add","收拢光环收尾"],"surfaceModel":"深墨底上无辉光的硬朗同心环线、细节点连接线与一枚铜色聚焦环；环与环之间用极浅刻度。","palette":"底深墨蓝，环线冷青，节点冰白，聚焦辐条铜色，外环插座琥珀绿。","typography":"大字门楣居中配辐射式节点标签，等宽用于环刻度与插孔号，标题允许打破基线旋转。","desktopComposition":"单屏以同心光环为主焦点居中，辐条默认指向最相关技能；证据计数作为节点上的细标注，provider 只在辐条指向外环时点亮。","mobileTransformation":"390px：圆心环压缩为纵向\"塔\"，每层一个技能 + 其 provider 插座的上下配对，辐条变成层间竖线。","mediaStrategy":"无本地合格素材，删除媒体区；光环为纯派生视觉，不伪造仪表盘或图表截图。","forbiddenPatterns":["假仪表盘面板","发光粒子场替代视觉","厂商 logo 墙/假的客户证言"],"compositionFingerprint":"concentric rings + rotating spoke → stacked socket pairs on mobile"}],"selectedDirectionId":"session-switchboard","selectionRationale":"项目机制的核心是\"把技能/代理/模板装进 Claude Code，并切换模型提供商\"——这是一种安装与路由动作，而非静态藏品或标签收藏。session-switchboard 用\"一条信号线扇出成能力轨道、再汇入可换接头的 provider 插座\"的接线排几何最能言说这一机制：它同时覆盖 skills·sub-agents·templates 三种条目、npx skills add 的接线命令，以及多模型切换这一点。相比之下，tool-rack 偏重单件工具的取用、capability-halo 偏重中心与外围的静态映射，都更接近目录展示而非流程。且接线排的暗面板 + 琥珀铜插头在不同 viewport 下有清晰的横向→纵向重组路径，便于实现证据驱动的派生视觉并在 390px 保持同一概念。"},"designBrief":{"schemaVersion":"dodot-design-brief-v1","selectedDirectionId":"session-switchboard","projectMetaphor":"能力像可路由的信号：一条来自技能的中央线路扇出成并行轨道，再汇入可换接头的模型提供商插座——装什么、往哪接、多模型切换，一目了然。","signatureVisual":"一条中央 agent 主线从左端出发，扇出为三条平行能力轨道（skills / sub-agents / config templates），末端重新汇入一排可换接头（Copilot、LiteLLM、DeepSeek…）的 provider 插座。","compositionFingerprint":"single → parallel rails → provider sockets","heroGeometry":"水平接线排：单线进入后分成多层垛叠短线（patch-bay），每层标一个能力类别，右端以插头符号对准一排纵向插孔。","sectionSequence":["切换开关序言（一条线如何接往不同能力）","能力轨道：skills / sub-agents / templates 三条并行轨","证据计数：12 技能 · 6 子代理 · 10 模板","provider 插座：Copilot、LiteLLM、DeepSeek 等可换接头","装线命令：npx skills add 的接线步骤","合上盖板收尾"],"surfaceModel":"磨砂暗面板丝网印刷质感：硬质嵌入式凹槽刻线、冷光铜色插头、细接线细影；面板上刻印比例尺与小标注。","palette":"底墨蓝黑，板面深石板灰，轨道线琥珀铜，插孔高光冷青，标注铁灰白。","typography":"编辑型超大门楣 + 窄行高接线标注；等宽字体用于插孔号与命令，衬线只留给强调说法。","desktopComposition":"单屏单一主焦点：左侧能力轨道线性阵列，右端固定一排竖向插孔，事实说明居于轨道上方，命令区悬浮在插座之下。","mobileTransformation":"390px：横向接线排回正为纵向竖线轨道，每条轨线上能力与插孔上下叠放成竖塔，文字与接线标注保留至少 20px 安全区。","mediaStrategy":"无本地合格素材，删除媒体区；标志视觉完全由接线轨与插孔的关系图派生，不伪造截图。","evidencePlan":["仓库描述：Curated skills, sub-agents, and config templates that supercharge Claude Code","三类能力计数：12 个技能、6 个子代理、10 套配置模板（来自 summary 与 readme）","安装方式与命令：npx skills add / 手动安装 ~/.claude（来自 readme commands）","provider 模板：Copilot、LiteLLM、DeepSeek、Qwen 等（来自 summary 证据）","仓库元数据：Python · MIT · GitHub 地址（来自 verified claims）"],"localeContract":{"zh-CN":"以\"接线台/信号路由\"为主线，编辑型超大门楣搭配窄行高标注；文本密度贴合中文自然语感，避免生硬翻砌英文。","en":"Line on the switchboard/routing metaphor; editorial oversized type with narrow-lead annotations; wording keeps natural English density, not a machine translation of Chinese."},"forbiddenPatterns":["三卡指标墙：大标语后紧跟恰好三张指标卡","假终端/假 IDE/假设置面板壳","发光网格或粒子场用作视觉替代","装饰性渐变/宽泛阴影填满每个区块"],"historicalReuse":{"sourceAssetId":"HEAD:luna-max-v1/feiskyer-claude-code-settings","decision":"rebuild","rationale":"旧产物把项目当\"配置图谱/继承层\"的静态索引，其 atlas 的继承层叙事与项目真实的安装-路由机制不符；旧文字与代码仅作隔离历史资产，不可作为事实来源。接线台的\"single → parallel rails → provider sockets\"更贴合\"安装技能并切换模型提供商\"这一实际流程，因此保留旧方案中被证明有效的编辑腔与克制纪律，重建一个新的标志视觉。","reusedElements":["编辑型超大门楣 + 窄行高注解的排版气质","证据驱动的索引式节奏：先以一件专属视觉解释结构，再回到 GitHub/安装验证","克制调色纪律：不用装饰渐变/粒子，视觉完全由关系图派生","禁止假 IDE、三卡 SaaS、Emoji、运行时远端图片等禁例","首屏单一主焦点、mobile 退回先文案后视觉的安全策略"],"discardedElements":["\"Configuration Atlas / 配置图谱\"隐喻及其继承层叙事","旧索引轴 + 四继承层的 hero 几何（左侧竖向索引轴连接四层）","旧象牙纸 #f3f0e8 / 墨 #20293b / 红 #d56052 配色与蒙灰渐变点阵背景","旧 atlas-branch 派生的 catalog 卡片布局"]}},"visualReview":{"schemaVersion":"dodot-automated-design-review-v1","status":"approved","summary":"实现忠实配套 selected direction session-switchboard：patch-bay SVG 真实表达了 single → parallel rails → provider sockets 的合成指纹，首屏即用一件专属派生视觉言说‘安装技能并切换模型提供商’这条实际流程，而非文案堆叠。证据（语言/许可证/12·6·10 计数/六个 provider/两条 npx 装线命令/仓库与首页地址）全部可在 material.json 溯源；六节段落顺序与 brief 及双语版本完全一致；未回退到三卡指标墙、假设备壳、卡片墙或装饰性渐变替代视觉；无假控件。390px 下各网格由 3/2 列折叠为单列并保持 20px 左右安全区，构成真实重构；唯一偏离是 brief 所述‘接线排在手机回正为纵向竖塔’未严格实现——bay 保持横向等比缩放，记为非阻塞 warning。七项 check 全部通过，故 status 为 approved。","checks":{"projectFit":{"passed":true,"evidence":"所选方向 session-switchboard 的 hero（一条信号线接往任意能力）、patch-bay 扇出三条能力轨后再汇入 provider 插座、rails（skills/sub-agents/config templates）、装线命令（npx skills add）与‘合上盖板’收尾均落地，构成 brief 描述的‘安装-路由’而非静态目录叙事；六个 data-dodot-section 顺序与 design-brief.sectionSequence 逐一对应（prologue→rails→evidence→sockets→wiring→closing），项目定位清晰。"},"evidenceBound":{"passed":true,"evidence":"PYTHON/MIT 及仓库归属来自 material.json 的 github.language/github.license/feiskyer·claude-code-settings；12 技能/6 子代理/10 模板对应 summary 的 12 curated skills、6 specialized sub-agents、10 config templates；六个 provider（Copilot、LiteLLM、DeepSeek、Qwen、Vertex AI、Azure）均出现于 summary 的 providers 列举；npx -y skills add --all feiskyer/claude-code-settings 与 readme.commands 逐字一致；~/.claude 覆盖与备份、github.com 及 feisky.xyz 首页地址均可在 material.json 溯源，计数区文案亦自述来自仓库描述与 README，未杜撰任何指标或证言。"},"signatureVisual":{"passed":true,"evidence":"bay SVG 以 viewBox 0 0 900 300 真实绘制 patch-bay：唯一 AGENT 源点（x=60,y=150）扇出为三条 amber 轨道并分别标注 SKILLS/SUB-AGENTS/CONFIG TEMPLATES，末端各接 P1–P8 的冷青插孔圆，figcaption 与 aria-label 明确声明‘派生示意，非产品界面截图’；这是表达 verified 关系（单线→并行轨→provider 插座）的专属派生几何，非假设备壳、非装饰性渐变。面板上的网格纹理属于磨砂面板的丝网表面，承载而并非替代该标志视觉。"},"mobileTransformation":{"passed":true,"evidence":"max-width:819px 下 .rails 3列→1列、.countWrap 与 .cmds 2列→1列、sectionHead 换行，均为真实列级重构而非简单竖向堆叠；.page padding 80px 20px 96px 保证 390px 至少 20px 左右安全区，符合 brief‘保留至少 20px 安全区’。注意：brief 曾言 390px 下横向接线排应‘回正为纵向竖线轨道、能力与插孔上下叠成竖塔’，实现中 bay SVG 保持横向等比缩放而未重组为竖塔——因页面的网格重构与安全区达标、概念仍被保留，故归为非阻断 warning。"},"localeParity":{"passed":true,"evidence":"zh-CN 与 en 两版 sectionSequence 与六处 data-dodot-section 完全同构，CSS 中仅字体栈（PingFang/Inter）因语言自然适配；英文为自然英文表述（One signal line… / Picked a provider, swap the connector, and go），非机械直译；zh-CN 有 414 CJK/557 拉丁，en 纯 1903 拉丁，密度均贴合各自语感，语义等价，事实一致。"},"antiTemplate":{"passed":true,"evidence":"未采用‘大标语→恰好三张指标卡’的 hero（12·6·10 作为铭刻式面板计数置于第二节，而非首屏三卡墙）；rails/sockets/cmds 各有独立几何语言（轨道顶线、插孔环、代码块），共用同一暗面板 line/board 属 brief 的 surfaceModel 连贯材质而非惰性重复；无浏览器/手机/终端/IDE/仪表盘外壳，patch-bay 明确为派生图；bay 内网格为面板表面丝网，非以发光网格或粒子替换标志视觉。"},"noFakeUi":{"passed":true,"evidence":"全文无假输入框、开关、标签页、搜索、图表面板、客户 logo 或证言；SVG 插孔圆与 socket::before 的圆环均为派生图中的静态标注，无任何假交互控件；code 块为字面命令展示而非伪造终端；QA 报告对四种 locale×viewport 均报 fakeControlCount:0、emptyLinkCount:0、consoleErrors:[]、networkRequests:[]。"}},"issues":[{"code":"mobile-signature-recomposition","severity":"warning","locale":"all","description":"design-brief 的 mobileTransformation 契约要求 390px 下横向接线排‘回正为纵向竖线轨道，每条轨线上能力与插孔上下叠放成竖塔’；实际实现中 bay SVG 使用 viewBox 900×300 且 width:100%，在窄屏下仅整体等比缩小，并未重组为纵向竖塔/能力与插孔纵向配对。","repairInstruction":"在 max-width:819px 媒体查询内为 .bay 自定义纵向重组：可将 bay 内部由横向换为以 data-dodot SVG 结构重排（或增加对应 mobile 分支样式），使轨线纵向排列且在每条轨线上方展示能力类别、下方叠放其 provider 插孔，同时维持首屏承载该派生视觉的概念不变；或退而更新 design-brief 的 mobileTransformation 描述以如实反映‘横向派生图等比缩放’的决定，并在重跑前保持证据驱动、不引入远端截图或假控件。"}]},"repairEvidence":[],"provenance":{"executor":"opencode","model":"deepseek/deepseek-v4-flash","opencodeVersion":"1.1.58","promptVersion":"dodot-showcase-deepseek-v4","inputHash":"0c713561f9c352628d827f792ea50ff9ede23f622ac2cf492a60428b1f46f4ca","artifactHash":"88d69f479a4679f6c4545fae469f041e4c64e7377b454dd233c143b8f8e09daa","designSkill":"dodot-showcase-design","historicalSeed":{"source":"git_head","sourceCanonicalKey":"github:feiskyer/claude-code-settings","assetId":"HEAD:luna-max-v1/feiskyer-claude-code-settings","sourceSchemaVersion":"v1","sourceGeneratorVersion":null,"sourceArtifactHash":"71e2cc6c5b26662720f28802a34adbd41a3e02daf63aba947dde37031a0be9f5","disposition":"repair_or_regenerate","seedPayloadHash":"175e17b81b14399e1a614aeeb155f2477413bf386afc97ce79ae0951c407b4a7"}},"qaEvidence":{"zh-CN":[{"viewport":"desktop","passed":true,"localePassed":true,"metrics":{"language":"zh-CN","h1Count":1,"h2Count":6,"sectionCount":6,"textLength":1276,"cjkCount":414,"latinLetterCount":557,"scrollWidth":1280,"clientWidth":1280,"scrollHeight":3083,"h1Top":129.59375,"bottomInset":192.34375,"brokenImageCount":0,"missingAltCount":0,"fakeControlCount":0,"emptyLinkCount":0},"screenshotHashes":{"top":"54d1103f2bf9c672af4be1b05a406da35474f53720995f9759222f0f922b0614","middle":"9f7636ba91da06af7a93d9bcb067b15b34ac5bf746b98d217bcc948a8b460e82","bottom":"75e9857268f0cd1646eddf16e65c413b867632747c6697f0396d9c54fa7754f7"},"consoleErrors":[],"networkRequests":[]},{"viewport":"mobile","passed":true,"localePassed":true,"metrics":{"language":"zh-CN","h1Count":1,"h2Count":6,"sectionCount":6,"textLength":1276,"cjkCount":414,"latinLetterCount":557,"scrollWidth":390,"clientWidth":390,"scrollHeight":3908,"h1Top":113.59375,"bottomInset":175.890625,"brokenImageCount":0,"missingAltCount":0,"fakeControlCount":0,"emptyLinkCount":0},"screenshotHashes":{"top":"170a16ca39c472ab4eb9dd1166005cfdf345f3ccded132495276d11999feb508","middle":"23a35b59d7a223987340605855f58e656d1f1bcea2a2694605416b7d897dba9c","bottom":"84deb3376d1b10a6f2975b6da325cab49cd98b2b5c1e1b403934f16e29a852d0"},"consoleErrors":[],"networkRequests":[]}],"en":[{"viewport":"desktop","passed":true,"localePassed":true,"metrics":{"language":"en","h1Count":1,"h2Count":6,"sectionCount":6,"textLength":2443,"cjkCount":0,"latinLetterCount":1903,"scrollWidth":1280,"clientWidth":1280,"scrollHeight":3198,"h1Top":129.59375,"bottomInset":191.921875,"brokenImageCount":0,"missingAltCount":0,"fakeControlCount":0,"emptyLinkCount":0},"screenshotHashes":{"top":"0936c721ada752fb384be2f3892d047c07fc2decfc6480642dad5da8da740830","middle":"54fdd6ab37b9f9d61ab5c26ce1b6fc31871018503e58bf5f6f5274cbc9339b07","bottom":"01511c2a0d571a2d9fc1d35bf0d876aa3eef4d2197a8f411e785851dbb43dc27"},"consoleErrors":[],"networkRequests":[]},{"viewport":"mobile","passed":true,"localePassed":true,"metrics":{"language":"en","h1Count":1,"h2Count":6,"sectionCount":6,"textLength":2443,"cjkCount":0,"latinLetterCount":1903,"scrollWidth":390,"clientWidth":390,"scrollHeight":4273,"h1Top":113.59375,"bottomInset":175.765625,"brokenImageCount":0,"missingAltCount":0,"fakeControlCount":0,"emptyLinkCount":0},"screenshotHashes":{"top":"d81091af881fab37c33202cc33614b092e16981227c13b63d6b6c7d7ef427b40","middle":"471a6176419a35e5d761dce65915f5c94fe3e68f715df39c0f2f337b4cf44e3d","bottom":"f928c27cfe1c87443b3c8d22e88e9718ca69f99cd30e94f7b2f73cb493e173a4"},"consoleErrors":[],"networkRequests":[]}]}},"generatorVersion":"opencode-1.1.58:deepseek/deepseek-v4-flash:dodot-showcase-deepseek-v4","publishedAt":"2026-08-20T13:02:11.175Z"},"rawExtraction":{"projectRevisionId":"cmt2zh02o00l26271isgzhan1","projectVersion":1,"sources":[{"canonicalKey":"github:feiskyer/claude-code-settings","role":"primary","revisionVersion":1,"url":"https://github.com/feiskyer/claude-code-settings"}],"facts":[{"key":"repository_owner","value":"feiskyer","evidence":[{"path":"repository.owner","excerpt":"feiskyer"}]},{"key":"repository_name","value":"claude-code-settings","evidence":[{"path":"repository.name","excerpt":"claude-code-settings"}]},{"key":"description","value":"Curated skills, sub-agents, and config templates that supercharge Claude Code — research, image gen, GitHub automation & more.","evidence":[{"path":"repository.description","excerpt":"Curated skills, sub-agents, and config templates that supercharge Claude Code — research, image gen, GitHub automation & more."}]},{"key":"primary_language","value":"Python","evidence":[{"path":"repository.language","excerpt":"Python"}]},{"key":"license","value":"MIT","evidence":[{"path":"repository.license","excerpt":"MIT"}]},{"key":"topics","value":"agentic-ai, agents, ai, claude-code, claude-code-agents, claude-code-plugins, claude-skills, codex, copilot, litellm, vibe-coding","evidence":[{"path":"repository.topics","excerpt":"agentic-ai, agents, ai, claude-code, claude-code-agents, claude-code-plugins, claude-skills, codex, copilot, litellm, vibe-coding"}]},{"key":"source_count","value":"1","evidence":[{"path":"projectRevision.sources","excerpt":"github:feiskyer/claude-code-settings"}]}],"taxonomy":{"category":"development_tools","subcategory":"data_ai_tools","confidence":0.65,"evidence":[{"path":"repository.description","excerpt":"Curated skills, sub-agents, and config templates that supercharge Claude Code — research, image gen, GitHub automation & more."}]},"lifecycle":{"stage":"active","confidence":0.75,"evidence":[{"path":"repository.pushedAt","excerpt":"2026-08-13T13:10:25.000Z"}]},"userIntents":[{"slug":"build_software","label":"构建或改进软件","confidence":0.65,"evidence":[{"path":"repository.description","excerpt":"Curated skills, sub-agents, and config templates that supercharge Claude Code — research, image gen, GitHub automation & more."}]},{"slug":"automate_work","label":"自动化工作流程","confidence":0.65,"evidence":[{"path":"repository.description","excerpt":"Curated skills, sub-agents, and config templates that supercharge Claude Code — research, image gen, GitHub automation & more."}]},{"slug":"create_content","label":"创作内容或设计","confidence":0.65,"evidence":[{"path":"repository.description","excerpt":"Curated skills, sub-agents, and config templates that supercharge Claude Code — research, image gen, GitHub automation & more."}]},{"slug":"analyze_data","label":"分析与理解数据","confidence":0.65,"evidence":[{"path":"repository.description","excerpt":"Curated skills, sub-agents, and config templates that supercharge Claude Code — research, image gen, GitHub automation & more."}]}],"readme":{"headings":["Claude Code Skills & Agents","快速开始","安装主插件（包含所有技能和代理）","安装主插件（包含所有技能和代理）","npx skills","列出可用技能","安装全部技能","手动选择要安装的技能","手动安装","备份原有配置","克隆本仓库","启动 Copilot Gateway 代理（监听 http://localhost:4141）","也可以用 tmux 在后台运行","tmux new-session -d -s copilot 'npx copilot-gateway@latest start --proxy-env'","技能列表","[brainstorming](./skills/brainstorming)","[codex-skill](./skills/codex-skill)","[nanobanana-skill](./skills/nanobanana-skill)","[gpt-image-skill](./skills/gpt-image-skill)","[youtube-transcribe-skill](./skills/youtube-transcribe-skill)"],"commands":["npx -y skills add -l feiskyer/claude-code-settings","npx -y skills add --all feiskyer/claude-code-settings","npx -y skills add feiskyer/claude-code-settings","npx copilot-gateway@latest start --proxy-env"]},"changeSet":[{"field":"authorName","beforeHash":"74234e98afe7498fb5daf1f36ac2d78acc339464f950703b8c019892f982b90b","afterHash":"41580edeee402059890717a5c962d73a189eb437f85fc2c6e4a30ae08332a373"},{"field":"description","beforeHash":"74234e98afe7498fb5daf1f36ac2d78acc339464f950703b8c019892f982b90b","afterHash":"2e6075b2515e4db9bb5075480abe205b7c26d5fed4eb43b0a5ce4a4f7d99f973"},{"field":"experienceUrl","beforeHash":"74234e98afe7498fb5daf1f36ac2d78acc339464f950703b8c019892f982b90b","afterHash":"c22a9faa9dc3c2a3b65310cc3d1a5685b1ee14ac4cec665dc9d52def1ab513a2"},{"field":"name","beforeHash":"74234e98afe7498fb5daf1f36ac2d78acc339464f950703b8c019892f982b90b","afterHash":"142683a6277dff01d8d3fec825220b3d076e685aa7a1763061daf61cee1b572e"},{"field":"repository","beforeHash":"74234e98afe7498fb5daf1f36ac2d78acc339464f950703b8c019892f982b90b","afterHash":"fd49a7bf19cd012d22afd7b2d2d4cd39bf7e9701e98d4ade766e604bc1a2aa11"},{"field":"sourceCount","beforeHash":"74234e98afe7498fb5daf1f36ac2d78acc339464f950703b8c019892f982b90b","afterHash":"6b86b273ff34fce19d6b804eff5a3f5747ada4eaa22f1d49c01e52ddb7875b4b"}]},"publishedAt":"2026-08-10T16:00:08.595Z","updatedAt":"2026-08-21T13:26:50.051Z","summary":{"id":"cmt2zh02t00l462714peqlppj","projectType":"template","oneLine":"精选技能、子代理与配置模板，开箱即用。","overview":"这是一个为 Claude Code 打造的技能与配置集合，包含深度调研、图片生成、GitHub 自动化等 12 个技能和 6 个子代理。提供 10 套模型提供商配置模板，支持 Copilot、LiteLLM、DeepSeek 等，可快速切换。通过官方 marketplace 或 npx skills 安装，适合希望扩展 Claude Code 能力的开发者。","highlights":["12 个精选技能","6 个专业子代理","10 套配置模板","多模型切换"],"bestFor":["Claude Code 用户","需要深度调研与自动化","多模型提供商切换"],"caveats":["部分技能依赖外部 API Key","手动安装会覆盖 ~/.claude 目录","技能过多可能影响性能"],"categorySuggestion":"education","subcategorySuggestion":"prompt_skill_resources","lifecycleStages":["idea_requirements","product_design","testing_quality"],"audienceIntents":["discover","learn","build","integrate"],"confidence":0.85,"evidence":[{"claim":"仓库提供精选技能、子代理和配置模板，为 Claude Code 增加深度调研、图片生成、GitHub 自动化等能力。","sourceType":"description","locator":"https://github.com/feiskyer/claude-code-settings"},{"claim":"主插件包含 12 个技能，如 brainstorming、deep-research、gpt-image-skill、github-review-pr 等。","sourceType":"readme","locator":"https://github.com/feiskyer/claude-code-settings"},{"claim":"提供 10 套配置模板，覆盖 GitHub Copilot、LiteLLM、DeepSeek、Qwen、Vertex AI、Azure、OpenRouter 等提供商。","sourceType":"readme","locator":"https://github.com/feiskyer/claude-code-settings"},{"claim":"包含 6 个专业子代理，如 PR 审查、Issue 修复、UI 工程等。","sourceType":"readme","locator":"https://github.com/feiskyer/claude-code-settings"},{"claim":"支持通过官方 marketplace 或 npx skills 安装，并提供手动安装方式。","sourceType":"readme","locator":"https://github.com/feiskyer/claude-code-settings"},{"claim":"deep-research 技能采用多 Agent 编排，将调研目标拆分为并行子任务并聚合结果。","sourceType":"readme","locator":"https://github.com/feiskyer/claude-code-settings"},{"claim":"github-review-pr 技能使用并行子代理进行多角度代码分析，包含安全维度和对抗式验证。","sourceType":"readme","locator":"https://github.com/feiskyer/claude-code-settings"},{"claim":"提供脚本一键更新所有已安装的 marketplace 和插件/技能。","sourceType":"readme","locator":"https://github.com/feiskyer/claude-code-settings"}],"publishedAt":"2026-08-17T14:00:54.976Z"},"github":{"url":"https://github.com/feiskyer/claude-code-settings","ownerAvatarUrl":"https://avatars.githubusercontent.com/u/676637?v=4","starsCount":1631,"forksCount":245,"language":"Python","syncedAt":"2026-08-17T13:57:14.700Z","license":"MIT","defaultBranch":"main","archived":false,"disabled":false,"lastChangedAt":"2026-08-13T13:10:25.000Z","missing":false},"tags":[{"name":"Vibe coding","slug":"vibe-coding","verification":"verified","evidenceUrl":"https://github.com/feiskyer/claude-code-settings","evidenceExcerpt":"GitHub topic: vibe-coding"}],"updates":[]},"entryPoint":"discovery","claim":{"state":"unclaimed","verified":false},"initialView":"beautified","community":{"viewer":null,"state":{"likesCount":0,"creativeCount":0,"followersCount":0,"commentsCount":0,"liked":false,"creative":false,"followed":false},"comments":{"comments":[],"nextCursor":null}}}]}],"$L24"]

一条信号线，接往任意能力